Home / All / Industrial News /

Treatment of belt deviation of belt conveyor

Treatment of belt deviation of belt conveyor

August 10,2021
Treatment of belt deviation of belt conveyor
1.Automatic adjustment of drum deviation: when the deviation range of the conveyor belt is small, an automatic centering roller can be installed at the deviation of the conveyor belt.

2.Single side vertical roll offset adjustment: when the conveyor belt is always biased to one side, multiple vertical rolls can be installed within the deviation range of the skewed side to reset the conveyor belt.

3.Proper tightening and deviation adjustment: when the conveyor belt deviates from left to right and the direction is irregular, it indicates that the conveyor belt is too loose. The tensioning device can be adjusted appropriately to eliminate the deviation.

4.Adjust the deviation of the drum:when the conveyor belt leaves the drum,check whether the drum is abnormal or moving,adjust the drum to the horizontal position and rotate normally to eliminate the deviation

5.Correct the deviation of the conveyor belt joint: the deviation of the conveyor belt is always in one direction, and the maximum deviation is at the joint. The center line of the conveyor belt joint and the conveyor belt can be corrected to eliminate the deviation.

6.Adjust the deviation of lifting rollers: the conveyor belt has a certain deviation direction and distance. Several groups of rollers can be lifted on the opposite side of the deviation direction to eliminate the deviation.

7.Adjust the deviation of the roller: the direction of the deviation of the conveyor belt is determined. Check whether the center line of the roller is not perpendicular to the center line of the conveyor belt, and the roller can be adjusted to eliminate the deviation.

8.Mucus adjustment is eliminated: the deflection point of the conveyor belt remains unchanged. If the idler and drum are found to adhere to the slime, the slime adjustment must be cancelled.

9.Correct the feed deviation: the conveyor belt will not deviate under light load and under heavy load. The feed weight and position can be adjusted to eliminate deviations.

10.Correction of bracket deviation: the deviation direction and position of the conveyor belt are fixed, and the deviation is serious. The level and perpendicularity of the support can be adjusted to eliminate the deviation.