Home > News > New Conveyor Project >

Belt conveyor project embedded part weld inspection in Hongkong China

News Group

Belt conveyor project embedded part weld inspection in Hongkong China

Issue Time:2020-05-14

SKE has handed over 6 belt conveyor system used for port reclaim project in Hongkong,China; All the previous five belt conveyor system are running in good condition.

The sixth belt conveyor project used for port reclaim solution has been installed and commissioned, now some inspection job is undergoing such as the embedded part weld, protection guide etc before operation.

SKE belt conveyor inspection

In the operation of the belt conveyor, the provisions of the items in the design of the conveyed items must be observed, and the design capabilities of the belt conveyor must be observed. Secondly, it should be noted that all types of personnel must not touch the moving parts of the belt conveyor, and non-professionals should not touch electrical components, control buttons, etc. at will. Finally, during the operation of the belt conveyor, it is not possible to open the inverter after the stage. If it is determined that the maintenance needs, it must be carried out under the condition of stopping the frequency conversion operation, otherwise the inverter may be damaged.

SKE belt conveyor engineering

SKE is one of the professional bulk material belt conveyor handling product and solution manufacturer and supplier in China, we have many years in belt conveyor engineering, belt conveyor manufacturing and belt conveyor system upgrade; Please feel free to contact us if there is any interest.